 |
 |
 |
|
Full-rack, dual channel wireless transmitter housed in a touring-grade, all-metal chassis.
- Works with PSM®1000 Personal Monitor System
- Features networked control capabilities via Wireless Workbench® software
- Offers a 72 MHz wide tuning bandwidth
- Includes P10T, power supply, two 1/2 wave antennas, hardware kit, 2 ethernet cables, 2 BNC cable assemblies, and user guide
The P10T is a networkable, full-rack, dual channel wireless transmitter
used in conjunction with the P10R Wireless Bodypack Receiver as part of
the PSM®1000 Personal Monitor System. It offers a 72 MHz wide tuning
bandwidth, networked remote control via Wireless Workbench® software,
advanced rechargeability options, and PSM®900 backwards compatibility.
Connections include balanced ¼” and XLR, loop out, dual Ethernet ports, and headphone monitor out.
Comes with front or back mountable antennas, and power and Ethernet jumper cables.
Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
|
RF Output Power
|
selectable: 10, 50, 100 mW (regionally dependent)
|
|
RF Output Impedance
|
50 Ω (typical)<.td>
|
|
Net Weight
|
850 g
|
|
Dimensions
|
483 mm X 343 mm X 44 mm
|
Power Requirement
(RF on, 100 mW power mode, no audio)
|
Input: 100-240V AC, 50/60 Hz, 0.5A max (5.5 max outlet loaded)
Output: 100-240V AC, 5A max, unswitched
|
|
Audio Input
|
|
Connector Type
|
Combination XLR and 6.35 mm (1/4”) TRS
|
|
Polarity
|
XLR: Non-inverting (pin 2 positive with respect to pin 3)
6.35 mm (1/4”) TRS: Tip positive with respect to ring
|
|
Configuration
|
Electronically balanced
|
|
Impedance
|
70.2 kΩ (actual)
|
|
Nominal Input Level
|
switchable: +4 dBu, –10 dBV
|
|
Maximum Input Level
|
+4 dBu: +29.2 dBu
–10 dBV: +12.2 dBu
|
|
Pin Assignments
|
XLR: 1=ground, 2=hot, 3=cold
6.35 mm (1/4”) TRS: Tip=hot, Ring=cold, Sleeve=ground
|
|
Phantom Power Protection
|
up to 60 V DC
|
|
Audio Output
|
|
Connector Type
|
6.35 mm (1/4”) TRS
|
|
Configuration
|
Electronically balanced
|
|
Impedance
|
Connected directly to inputs
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
-
Full rack, dual-channel transmitter in a professional, touring grade chassis
-
72 MHz wide tuning range provides flexibility and performance in crowded, unpredictable RF environments
-
Networkable over Ethernet connection to provide comprehensive
frequency coordination and transmitter remote control via Wireless
Workbench® software:
-
RF mute enable/disable
-
RF output power adjustments
-
Aux/line level
-
Audio input level
-
Channel/device name edit
-
Firmware updates
-
Backwards-compatible with PSM®900 receivers
-
RF Mute Switch allows system setup without causing RF interference
-
Sync RF scan information from a P10R bodypack quickly and easily over IR link
-
Switchable 10/50/100 mW output power provides a robust RF link in a variety of performance environments
-
Spectrum display provides a detailed frequency plot on the menu screen with selectable zoom
-
Front panel audio input gain adjustment and LED level meter with clipping indicator
-
Exceptional transmitter linearity vastly reduces frequency
intermodulation, allowing more compatible channels per frequency range
-
High-contrast LCD with grouped menu items provides an intuitive user interface
-
Front or back mountable antennas
-
Compatible with PA421A and PA821A antenna combiners
-
Loop out connectors for multiple mix setups and easy installation
-
Switchable +4dBu and -10 dBV input level
-
Balanced, ¼" and XLR connectors
-
1/8" headphone out on the front panel for easy monitoring
|
|
|
|
|
|
|